Balaclava is of heavy quality, absorbs moisture well and has a good...
Balaclava is of light quality, absorbs moisture well and has a good...
Subcategories
Adapters for 40/30/25mm axle using magnetic ring A4461/A4462
ALFANO 6 2T - A1060 ALFANO 6 2T: the integrated GPS antenna (latest generation) picks up 3 groups of satellite systems. (GALILEO EU, European high precision satellite navigation, NAVSTAR US, GLONASS RU, total +/- 35 satellites), Bluetooth 4.0, lithium-ion battery capacity 3000 mA.Delivered with :- A4510 cable for USB charger type A.- A1600 RPM sensor.
ALFANO 6 1T- A1055 ALFANO 6 1T: the integrated GPS antenna (latest generation) picks up 3 groups of satellite systems. (GALILEO EU, European high precision satellite navigation, NAVSTAR US, GLONASS RU, total +/- 35 satellites), Bluetooth 4.0, lithium-ion battery capacity 3000 mA.Delivered with :- A4510 cable for USB charger type A!- A1600 RPM sensor.
This module allows the acquisition of pedal and steering wheel movements.- 2 x pedal movement inputs- 1 x flywheel movement input- 3-axis force sensor integrated in the boxing machinequantity of A1204. Box4Move
USB-kabel voor het downloaden van gegevens van de ALFANO 6, ook voor het opladen van de batterij van de Alfano 6.
This Hall effect sensor is used to measure the position of the brake or accelerator pedal.Designed for the module: Box12 / Box4Move.
This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box 12 / Box Move.
Extension for NTC sensors - 135cm NTC extension cable for connecting all NTC sensors
HUB with 2 inputs: for 2 Speed Sensors, specific for Box12 - 20cm This HUB allows the simultaneous connection of two A2201 speed sensors.
HUB with 2 inputs : SPEED + MAGNETIC - 20cm New model, this Hub A2194 replaces the old model A2192. This HUB allows the simultaneous connection of a speed sensor A2201 (old model) or the A2203 (new model) + a magnetic sensor A1302Note: this HUB is specially designed to connect to the green connector of the PROIIIevo, ALFANO6.
HUB with 2 inputs : SPEED + MAGNETIC/INFRARED - 20cm This HUB allows the simultaneous connection of a speed sensor A2201 + an infrared sensor A1401/A1411 or a magnetic sensor.Note: this HUB is specially designed to connect to the green connector of the PROIIIevo, ALFANO6.
Designed for reading the coded infrared beams of ALFANO transmitters, ref. A4100Please note: this item is delivered in the box with the PROIIIevo
Magnet alone - 20 pieces D6x4mm Can be used for speed sensor A2201 and Hall sensor A2405
Ring with 4 magnets for SPEED sensor - D: 50mmRing with 4 magnets for axle diameter 50mm for speed sensor A2201.Please note: this ring allows a reaction on the 4x faster speed pick up.
Ring with 4 magnets for SPEED sensor - D: 50mmRing with 4 magnets for axle diameter 50mm for speed sensor A2201.Please note: this ring allows a reaction on the 4x faster speed pick up.
Special cable 200cm for 0-5V sensor connections, must be connected to the Lambda input of the Box12 A1160.- Yellow Wire = Ground (GND)- Red wire = +5V- Green wire = Sensor signal from 0 to +5V
Cable for charging the ALFANO 6 battery (cable supplied with the ALFANO 6). Warning: this cable does not work for data downloading.
USB cable for downloading data from the ALFANO 6, also for charging the battery of the Alfano 6.
This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor is equipped with a hole designed to install this sensor or this sensor can be installed on an aluminium durit adapter, ref. A261, A262, A263, A264.Note: this sensor must be used with an extension cable ref. A3301 or a hub ref. A2190.