Balaclava is of heavy quality, absorbs moisture well and has a good...
Balaclava is of light quality, absorbs moisture well and has a good...
Subcategories
Bearing for oil bath clutch (outside) and crankshaft bearing GX270 (output side).
Bearing on the drive side (engine) and in the oil bath clutch.
Cable from the ignition coil to the circuit breaker. GX160 to 270.
Carburettor Dichtung zwischen Isolator und Vergaser GX240 / GX270 K1, U1, UT1
Seal kit carburettor GX270, GX340, GX390 The sentence consists of:- 1x O-ring float chamber- 1x gasket petcock- 1x seal fixing screw float chamber- 1x seal drain screw float chamber- 1x O-ring idling nozzle
Clutch friction disc (cover disc) suitable for Honda GX120 wet clutch up to 270.r
Clutch hub for Honda wet clutch. Suitable only for crankshaft with 25mm diameter.
Clutch disc (steel) suitable for oil bath clutch Honda GX120 to GX270.
Spring for pressure plate suitable for oil bath clutch Honda GX120 to 270.
Retaining plate for clutch spring suitable for Honda GX120 to 270 wet clutch.
Coupling weight (1 piece) suitable for Honda GX120 to 270 wet clutch.
Gasket for the clutch / gearbox housing on the Honda GX240, GX270
Original cylinder head GX 270 K1 / U1 / UT1 with valve guides. The head is delivered without valves, without valve springs, without rocker arms and without mounting material for the rocker arms.
Cylinder head gasket Honda GX 270 K1 / U1 / UT / RT.Not suitable for the current GX270 UT2 / RT2 motors!
Cylinder head gasket Honda GX 270 K1 / U1 / UT / RT.Not suitable for the current GX270 UT2 / RT2 motors!
For engine crankcase cover GX160 / 200 and coupling housing GX270.
Clutch basket with pinion for the oil bath clutch GX 240/270.
Black Exhaust Cover for Original Exhaust GX270 K1, U1, UT1.Does not fit with the current UT2 models.
Seal between exhaust pipe and Exhaust (muffler)
Seal between cylinder head and exhaust manifold. Fits Honda GX270 to 390 engine.
The seal kit contains: - 1x cylinder head gasket- 1x valve cover gasket- 1x motor housing seal- 1x gasket carburettor - insulator- 1x gasket isolator - cylinder head- 1x exhaust gasket Simmerrings and seals for oil bath coupling are not included! Fits the older GX270 K1, U1, UT1 engines. NOT suitable for the current UT2 motors!
with seal and drain plug. For GX270 to 390 carburettors.
Red metal case (without inner workings) for recoil starter.
Original ignition coil GX270 to 390 K1, U1, UT1. NOT suitable for the current UT2 motors!
Gasket between cylinder head and insulator GX240 / GX270 K1, U1, UT1.
Gasket between cylinder head and insulator GX240 / GX270 UT2, RT2
Gasket between cylinder head and insulator GX240 / GX270 UT2 , RT2
On / Off switch sitting in the fan cover (Thailand production).Fits Honda GX120 / 160/200 K1 / U1 / UT / UT2 And for Honda GX240 / 270/340/390 K1 / U1 / UT1. With the current UT2 motors, this switch does not fit!
Oil filler cap with gasket for GX160 to 390.Attention: This article is not the dipstick but the simple black closure.
On / Off switch sitting in the fan cover (Japanese production).Fits Honda GX120 / 160/200 K1 / U1 / UT / UT2 And for Honda GX240 / 270/340/390 K1 / U1 / UT1. With the current UT2 motors, this switch does not fit!
Original exhaust valve Honda GX270 K1 / U1 / UT1This valve does not fit with the current UT2 model. The outlet valve 14721-Z5K-000 is required here.
Original intake valve Honda GX270 K1 / U1 / UT1 This valve does not fit with the current UT2 model. Here the inlet valve: 14711-Z5K-000 is needed.
New design = small piston rings0,25 measurement
New design = small piston rings0,50 measurement
New design = small piston ringsStandard measurement
Old design = wide piston ringsStandard measurement
Piston standard "new" dimension (for small piston rings)
For original valve Honda GX270 to 390 UT1 / UT2.
Return spring (large spiral spring) for pull starter GX270 to 390 ..
Complete starter with rope and handle, GX270 K1 / U1 / UT1
For attaching the starter to the fan cover. GX270 to 390
Fixing screw for throttle cable holder. Suitable for Honda GX 120 to 3910
Sealing ring for engine housing GX270. Same simmering on both sides.
Seal VITON * for engine housing and cover GX 270. Same seal on both sides. * (registered trademark of Dupont)
Metal plate with rubber seal between carburetor and air filter line.
Original Honda candle plug (Japan production). Fits all Honda GX 270 to 390 engines.
Compression spring for the guide disc fixing screw. Gx270 to 390.
Original cylinder head GX 270 K1 / U1 / UT1 with valve guides. The head is delivered without valves, without valve springs, without rocker arms and without mounting material for the rocker arms.