Balaclava is of heavy quality, absorbs moisture well and has a good...
Balaclava is of light quality, absorbs moisture well and has a good...
For all your Honda GX390 or Loncin parts, you're at the right place!
Would you like to have more HP? BeNeDu-Racing has years of experience with Tuning of Honda engines.
Subcategories
Air baffle on the cylinder head (below) GX 340/390
Plastic cover for original air filter GX 340/390
Luffilter suitable for Honda engine GX340K1, GX340U1, GX390K1, GX390T1, GX390U1, GX390UT1, GX390UT2
Air filter base (plastic) with intake pipes (rain protection, noise reduction)
- Type: 90mm- Hub: Ø 25.4 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
- Type: 90mm- Hub: Ø 25.4 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
- Type: 90mm- Hub: Ø 25 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
- Type: 110mm- Hub: Ø 25 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
Blower cover for GX 340/390 K1, U1, UT1 in red.NOT suitable for the UT2 motors.
Cable from the ignition coil to the circuit breaker. GX160 to 270.
standard carburettor GX390. Delivery without choke lever.
Crankshaft wedge - flywheel GX270 to 390.
Connecting rod for GX Honda 340/390 K1, U1, UT1, UT2, standard size
Conversion crankshaft to centrifugal lubrication for Honda GX270-390. Parts to be machined (crankshaft and balance shaft) must be returned (price does not include a new crankshaft).
Bearing in the cover (output side) for GX340 / 390.
Bearing in the cover (output side) for GX340 / 390.
Crankshaft GX 390 K1 / U1 / UT1 / UT2.Shaft dimension Ø 25,4mm = 1 inch (Q-type) incl. Ball bearing flywheel side
Voor oliebadkoppeling aan het motorrondsel GX160 tot 270.En voor krukas GX 340/390.
For oil bath clutch to engine sprocket GX 160 to 270. And for crankshaft GX 340/390.
Shaft dimension Ø 25 mm (S-type) incl. Ball bearing flywheel side
For tuned engines.The inner diameter is Ø 32mm and additionally reinforced with a metal ring.Fits our exhaust manifolds No. 1588 and 1589th
For tuned engines.Reinforced metal seal. The inside diameter is Ø 35mm.Fits our exhaust manifolds No. 1589A and 1589B
Diameter: 32 mmMaterial: steelRecording flexible tube: 46/50 mmFor engine: Honda GX340 / 390
Seal between cylinder head and exhaust manifold. Fits Honda GX270 to 390 engine.
Screw for fixing the float chamber.Fits Honda GX 120 to 390th
Pre-filter for Honda engines GX340K1, GX340U1, GX340UT2GX390K1, GX390T1, GX390U1, GX390UT1, GX390UT2
Friction lining set (= 2 pieces) for Amsbeck clutch 110. Width of the linings: approx. 25mm.
Cylinder head gasket GX 390 K1 / U1 / UT1 (thick version)
The seal kit contains: - 1x cylinder head gasket- 1x valve cover gasket- 1x motor housing seal- 1x gasket carburetor - insulator- 1x gasket insulator - cylinder head- 1x exhaust gasket
The seal kit contains: - 1x cylinder head gasket- 1x valve cover gasket- 1x motor housing seal- 1x gasket carburetor - insulator- 1x gasket insulator - cylinder head- 1x exhaust gasket
Seal kit carburetor GX270, GX 340, GX390 The sentence consists of:- 1x O-ring float chamber- 1x gasket petcock- 1x seal fixing screw float chamber- 1x seal drain screw float chamber- 1x O-ring idling nozzle- 1x O-ring water separator
Sealing ring for oil dipstick and oil filler neck.
Black plastic handle for starter rope. GX270 to 390 K1 / U1 / UT1
with seal and drain plug. For GX270 to 390 carburettors.
Original ignition coil GX270 to 390 K1, U1, UT1. NOT suitable for the current UT2 motors!
For big carburetors. The older GX340 engines have larger carburetors installed. Here this isolator is needed.This isolator is standard on the GX390K1, UT, UT1. Does not fit with the current UT2 motor!
Knee tube (air filter line) GX 340/390 K1, UT, UT1. Does not fit with the current UT2 motor!
Metal latch for pull starter. GX270 to GX390.
On / Off switch sitting in the fan cover (Thailand production).Fits Honda GX120 / 160/200 K1 / U1 / UT / UT2 And for Honda GX240 / 270/340/390 K1 / U1 / UT1. With the current UT2 motors, this switch does not fit!
Olieaftapplug M12 (zonder afdichtingsring) voor motorhuis Honda GX 340/390.
Oil filler cap with gasket for GX160 to 390.Attention: This article is not the dipstick but the simple black closure.
On / Off switch sitting in the fan cover (Japanese production).Fits Honda GX120 / 160/200 K1 / U1 / UT / UT2 And for Honda GX240 / 270/340/390 K1 / U1 / UT1. With the current UT2 motors, this switch does not fit!
Standard dimension (for wide piston rings) Fits Honda GX390 K1, U1 and UT1. With the current GX390 UT2 these piston rings are not suitable!
Standard dimension (for wide piston rings) Fits Honda GX390 K1, U1 and UT1. With the current GX390 UT2 these piston rings are not suitable!
Standard dimension (for wide piston rings) Fits Honda GX390 K1, U1 and UT1. With the current GX390 UT2 these piston rings are not suitable!
Red metal housing (without inner workings) for recoil starter, GX 340/390.
Return spring (large spiral spring) for pull starter GX270 to 390 ..
Return spring (large spiral spring) for pull starter GX270 to 390.
Metal plate with rubber seal between carburetor and air filter line.
For attaching the starter to the fan cover. GX270 to 390
Screw for fixing the guide pulley of the pawls. GX270 to 390
Fixing screw for throttle cable holder. Suitable for Honda GX 120 to 3910
Gasket between cylinder head and insulator GX340 / 390 UT2.
Gasket between carburetor and insulator GX340 / GX390 UT2.
Seal crankcase suitable for Honda engine GX3400UT2, GX390UT2
Honda engine:GX340K1,GX340U1,GX390K1, GX390T1,GX390U1,GX390UT1
Honda engine:GX340K1,GX340U1,GX390K1, GX390T1,GX390U1,GX390UT1
Original Honda candle plug (Japan production). Fits all Honda GX 270 to 390 engines.
Metal latch for pull starter. GX270 to GX390.
Compression spring for the guide disc fixing screw. Gx270 to 390.
Complete starter with rope and handle, GX 340/390 K1 / U1 / UT1 in red.
For original valve Honda GX270 to 390.