No products
Honda GX270/390 Tuning
- B&S World Formula
-
Biland SA250
- Biland SA250 Engine's
-
Biland SA250 Part's
- Carburettor Biland SA250
- Clutch Biland SA250
- Connecting Rod & Crankschaft Biland SA250
- Cooling System Biland SA250
- Cylinder Biland SA250
- Cylinder Head Biland SA250
- Engine Holder Biland SA250
- Exhaust Biland SA250
- Gasket Biland SA250
- Hot Head Heater
- Ignition & Battery Biland SA250
- Oil & Lubrication Biland SA250
- Other Parts Biland SA250
- Piston Biland SA250
- Sprocket & Chain Biland SA250
- Starter Biland SA250
- Timingbelt Biland SA250
- Tools Biland SA250
- Valve Biland SA250
- Biland SA250 Tuning
- Biland SA250 Used part's
- Clothing
- Engine Parts
- Helmets
-
Honda Engines
- Honda Engines
-
Honda GX-160/200cc parts
- Airfilter Honda GX160/200cc
- Carburettor Honda GX160/200cc
- Clutch Honda GX 160/200
- Crankschaft & Connectingrod Honda GX160/200cc
- Cylinderhead Honda GX160/200cc
- Exhaust Honda GX160/200cc
- Gasket Honda GX160/200cc
- Governor assembly Honda GX160/200cc
- Ignition Honda GX160/200cc
- Ignitionwheel Honda GX160/200cc
- Motor bracket & Clamps Honda GX160/200cc
- Starter Honda GX160/200cc
- Valve & Camshaft Honda GX160/200cc
-
Honda GX-270cc Parts
- Airfilter Honda GX270
- Camshaft & Valves Honda GX270
- Carburettor Honda GX270
- Clutch Honda GX270
- Crankcase Honda GX270
- Crankshaft & Conrod Honda GX270
- Cylinderhead Honda GX270
- Engine Mount Honda GX270
- Exhaust Honda GX270cc
- Flywheel Honda GX270
- Gasket Honda GX270
- Ignition Honda GX270
- Speed limiter Honda GX270
- Starter Honda GX270
- Honda GX-390cc parts
- Honda GX160/200 Tuning
-
Honda GX270/390 Tuning
- - Honda TuningCylinder
- Airfilter - Honda Tuning
- Airintake - Honda Tuning
- Amsbeck Clutch
- Carburetor - Honda Tuning
- Crankshaft & Connecting Rod & Piston - Honda Tuning
- Cylinderhead & Valves - Honda Tuning
- Exhaust / Silencers - Honda Tuning
- Exhaust Manifold - Honda Tuning
- Flywheel & Ignition - Honda Tuning
- Fuel pump - Honda Tuning
- Suco Clutch
- Nachbau Honda Motoren
- Parts Imitation Honda
- Iame
-
Kart Parts
- Axles & Accessories
- Bearings
- Bodyworks & Fixation
- Brakedisc & Gear Supports
- Brakes & Accessories
- Chain Protection
- Chassis Protectors & Clamps
- Energy Kart
- Gasoline Tanks & Parts
- Hot Head Heater
- Hub Wheel
- Kart cover
- Lead weight
- Operation & Miscellaneous
- Pedals & Parts
- Rims
- Seat
- Steering Wheel & Parts
- Sticker
- Stubaxle & Eccentrics
- Laptimers
- Oil & Lubrication
- Other karts & Parts
- Parolin Kart & Parts
- Pitbok
- RK1
-
Rotax Max
- Air Box Rotax Max
- Carburateur Rotax Max
- Carter Rotax Max
- Clutch Rotax Max
- Crankshaft Rotax Max
- Cylinder Rotax Max
- DD2 parts Rotax Max
- Electronics Rotax Max
- Exhaust Rotax Max
- Gasket Rotax Max
- Ignition Rotax Max
- Powervalve Rotax Max
- Radiator Rotax Max
- Rebuild & Repair Rotax Max
- Rotax Max engine complete
- Rotax Wear
- Tools Rotax Max
- XPS Products
- Stone Kart Products
-
SwissAuto250
- Aero 1000 SwissAuto250
- Engines SwissAuto
-
Parts SwissAuto
- Airbox Swissauto
- Balancer Swissauto
- Battery Holder Swissauto
- Carburator Swissauto
- Carter Swissauto
- Clutch Swissauto
- Crankshaft & Conrod Swissauto
- cylinder head Swissauto
- Documents
- Exhaust Swissauto
- Harness Swissauto
- Hot Head Heater
- Ignition Swissauto
- Injection Swissauto
- Oil SwissAuto
- Piston Swissauto
- Radiator Accessories
- Revision & Service
- Side Cover Swissauto
- Tandwiel demper Swisauto
- Tools Swissauto
- Valve cover Swissauto
- Waterpump Swissauto
- Tillotson T4
- TM Engine & Parts
-
Tony - Exprid - Kosmic - FA - Redspeed
- Axle & Bearing OTK
- Bodywork OTK
- Bottom plate OTK
- Brake system OTK
- Bumper parts OTK
- Chain guard OTK
- Engine mount OTK
- Exhaust support OTK
- Fuel tank OTK
- Lubricants and sprays OTK
- Pedals OTK
- Seat OTK
- Sprocket carrier OTK
- Stabilizer
- Steering & Tie rod OTK
- Stickers OTK
- Stub Axle OTK
- Wheel hub OTK
- Wheel OTK
- Tools
- Tyres
Top sellers
-
Speed Balaclava "Offenbach"
Review(s): 0Balaclava is of heavy quality, absorbs moisture well and has a good...
€ 1,49 -
Speed Balaclava "Dortmund" light
Review(s): 0Balaclava is of light quality, absorbs moisture well and has a good...
€ 1,19 -
-
Looking for a Honda tuning parts? Find them! We also do full tuning from a Honda GX160 or 390! Please contact us for more information!
Honda GX270/390 Tuning There are 51 products.
Subcategories
-
€ 289,95Amsbeck Clutch compleet Typ 110 (25,4mm)
Review(s): 0- Type: 90mm- Hub: Ø 25.4 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
€ 289,95 -
€ 242,00Amsbeck Clutch compleet Typ 90 (25,4mm)
Review(s): 0- Type: 90mm- Hub: Ø 25.4 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
€ 242,00 -
€ 234,95Amsbeck Clutch compleet Typ 90 (25mm)
Review(s): 0- Type: 90mm- Hub: Ø 25 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
€ 234,95 -
€ 273,95Amsbeck Clutch type 110 compleet (25mm)
Review(s): 0- Type: 110mm- Hub: Ø 25 mm (1 inch)- Switch-on speed: 1800 rpm. Complete with mounting material and sprocket mount M24x1,5.Fits engines with a 25mm shaft (e.g., Honda GX270, GX340, GX390).
€ 273,95 -
-
€ 6,95 -
€ 6,95 -
€ 157,95Conversion crankshaft to centrifugal...
Review(s): 0Conversion crankshaft to centrifugal lubrication for Honda GX270-390. Parts to be machined (crankshaft and balance shaft) must be returned (price does not include a new crankshaft).
€ 157,95 -
€ 172,55Cylinder Drilling & Fine honing 2...
Review(s): 0Cylinder Drilling & Fines for oversize pistons ((0,25, 0,50, 0,75)) Ø 89 + 90 mm.The part to be machined (cylinder block) must be loaded. (Price does not include new cylinder block)
€ 172,55 -
€ 29,95 -
€ 24,74 -
Exhaust seal Ø 35mm GX390 Honda GX390
Review(s): 0For tuned engines.Reinforced metal seal. The inside diameter is Ø 35mm.Fits our exhaust manifolds No. 1589A and 1589B
€ 19,95 -
€ 84,95Exhaust manifold 32mm (Flex 46/50)
Review(s): 0Diameter: 32 mmMaterial: steelRecording flexible tube: 46/50 mmFor engine: Honda GX340 / 390
€ 84,95 -
€ 74,95Exhaust manifold 35mm (Flex 46/50)
Review(s): 0Diameter: 35 mmMaterial: steelRecording flexible tube: 46/50 mmFor engine: Honda GX340 / 390
€ 74,95 -
€ 75,69 -
€ 62,49 -
€ 7,95 -
€ 30,00 -
€ 7,95 -
€ 33,88 -
€ 30,49Friction lining set ( 2 pieces) for...
Review(s): 0Friction lining set (= 2 pieces) for Amsbeck clutch 110. Width of the linings: approx. 25mm.
€ 30,49 -
€ 38,91 -
€ 40,95 -
€ 16,95 -
€ 34,12 -
€ 31,95Intake manifold for air filter
Review(s): 0Air filter fitting without screw set for sport air filter Art.No. 1503.Fits original carburettor on the Honda GX270 to 390.
€ 31,95 -
€ 39,65 -
€ 549,00Mikuni TM33 carburetor complete
Review(s): 0Mikuni carburetor kit complete, front for Honda GX390 / BND405 or replica.
€ 549,00 -
€ 49,95 -
€ 310,00New Gage Roller Rockers GX390 1.3 U/Lite...
Review(s): 0The New Gage Roller Rockers are now available. These rockers have a true roller tip and are manufactured out of high quality billet aluminum suitable for your high RPM GX390. Easy application and extremely durable.
€ 310,00 -
€ 10,95 -
€ 10,95 -
€ 5,95 -
€ 49,00 -
€ 49,00 -
€ 14,95Push rod reinforced GX 340/390
Review(s): 0Reinforced aluminum push rod for Honda GX340 / 390.Length as original rod (165mm). Note: A different guide plate (no.14791-ZK6-880) is required for this rod in the cylinder head! When using the milled aluminum rocker arms (No. 1675), no sheet is required!
€ 14,95 -
€ 90,75 -
€ 39,95Surface treated rocker arm (1 piece)
Review(s): 0This rocker arm is treated against risk of fracture.Price per piece, no set!
€ 39,95 -
€ 2,95 -
€ 243,00 -
€ 3,95 -
€ 15,99 -
€ 19,95 -
€ 31,95Valve spring extra hard GX270/390
Review(s): 0Set = 2 pieces.Reinforced valve springs for Honda GX270 to 390. The original springs are replaced completely.We recommend these springs for engines equipped with large wedge-proof valves and a Tunign Camshaft. No additional inner springs are required.
€ 31,95 -
€ 6,95Valve spring hard (2 pieces ) GX390
Review(s): 0Additional inner spring set (set = 2 pieces) These valve springs are inserted into the original and strengthen them.These springs are suitable for engines which have been easily machined (e.g., RPM controllers removed).
€ 6,95 -
€ 14,95 -
€ 57,95Wedge-proof inlet valve Ø 33mm standard
Review(s): 0Diameter Ø 33 mm (standard). Fits the new GX390 UT2Complete with plate, wedges, rotocap
€ 57,95 -
€ 57,95Wedge-proof inlet valve Ø 35mm standard
Review(s): 0Diameter Ø 35 mm (standard). Fits the "old" GX390 UT1, U1, K1Complete with plate, wedges, rotocap
€ 57,95 -
€ 57,95Wedge-proof inlet valve Ø 36mm standard
Review(s): 0Diameter Ø 36 mm "Large". Fits the new GX390 UT2Complete with plate, wedges, rotocap For this valve, the valve seat must be expanded.
€ 57,95 -
€ 63,95Wedge-secured exhaustvalve Ø 31 mm standard
Review(s): 0Diameter Ø 31 mm standard. Fits all GX390 UT2 (New), UT1, U1, K1Complete with plate, wedges, rotocap
€ 63,95 -
€ 61,95Wedge-secured exhaustvalve Ø 32 mm standard
Review(s): 0Diameter Ø 32 mm "Large". Fits all GX390 UT2 (New), UT1, U1, K1Complete with plate, wedges, rotocap For this valve, the valve seat must be expanded.
€ 61,95
